IKEA FRYSA Manuel d'utilisateur télécharger pdf (Page 17)

Problem Possible cause Solution

The compressor does not

start immediately after

pressing the Fast Freezing,

or after changing the tem-

perature.

This is normal, no error has

occurred.

The compressor starts after a

period of time.

Water flows on the floor. The melting water outlet is

not connected to the evap-

orative tray above the

compressor.

Attach the melting water outlet

to the evaporative tray.

Temperature cannot be set. The Fast Freezing function

is switched on.

Switch off Fast Freezing man-

ually, or wait until the function

resets automatically to set the

temperature. Refer to "Fast

Freezing function".

DEMO appears on the dis-

play.

The appliance is in demon-

stration mode.

Keep the OK pressed for ap-

proximately 10 seconds until a

long sound is heard and dis-

play shuts off for a short time.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The food products' tem-

perature is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

The door has been

opened often.

Open the door only if necessa-

ry.

The Fast Freezing function

is switched on.

Refer to "Fast Freezing func-

tion".

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appliance.

If your appliance still is not

working properly after making

the above checks, contact the

After Sales Service. You can find

the list at the end of this manual.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the After Sales Service.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

IKEA FRYSA Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Non IKEA FRYSA