IKEA MEDELSTOR Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
What to do if you want to stop using multi-
tablets
Before you start to use detergent, salt and
rinse aid separately do the following
procedure.
1. Deactivate the Multitab option.
2. Set the highest level of the water
softener.
3. Make sure that the salt and rinse aid
containers are full.
4. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
5. When the programme is completed,
adjust the water softener according to
the water hardness in your area.
6. Adjust the released quantity of rinse aid.
Half Load
With this option you can wash a small load
of tableware and cookware.
The option decreases the programme
duration and the consumption of water and
energy.
Load both baskets and use less quantity of
detergent.
How to activate Half Load
Press , the related indicator comes on.
If the option is non compatible with the
selected programme, the Half Load
indicator does not come on.
This option is available with ,
and .
Settings
Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings can
be changed:
The level of the water softener according
to the water hardness.
The activation or the deactivation of the
acoustic signal for end of programme.
The deactivation of the rinse aid
dispenser when you want to use the
Multitab option without rinse aid.
These settings will be saved until you
change them again.
How to set the programme selection mode
The appliance is in programme selection
mode when, after the activation, the display
shows the number of programme .
The display shows the programme duration
after some seconds.
When you activate the appliance, usually it
is in programme selection mode. However,
if this does not happen, you can set the
programme selection mode in the following
way:
1. Press and hold simultaneously
and until the appliance is in
programme selection mode.
The water softener
The water softener removes minerals from
the water supply, which would have a
ENGLISH 10
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Commentaires sur ces manuels

Pas de commentaire